BBTR-3000 MM RASOIO BAGNATO

DOVERE DI MACCHINA


DOPO L'OPERAZIONE DI CROMATURA DELLA DIMENSIONE NATURALE FINO AL CROMO, LA MACCHINA DA BARBA VIENE UTILIZZATA PER PORTARLA ALLO SPESSORE DESIDERATO. LA PELLE RASATA DIVENTA PIÙ DRAPPEGGIATA E MORBIDA RISPETTO ALLA PRECEDENTE.

BBTR - 3000 WET SHAVING MACHINE

WITH 3000 MM WORKING WIDTH

 

THE GOODS ARE OF TURKISH ORIGIN. HAVE BEEN PRODUCED IN OZDERSAN TANNERY MACHINES CO. LTD.

3000 MM. SIZED LEATHER, FULL PROCESSED LEATHER, UNSPLITTED GRAIN LEATHER, SPLITTED FULL GRAIN LEATHER CAN BE PROCESSED WITH OUR MACHINE WHICH IS HIGH QUALITY, FAST RESULTED AND LATEST TECHNOLOGY MACHINE. OUR PRODUCTION 3000 MM. SHAVING MACHINE IS USED FOR EVERY KIND OF LEATHER AND ESPECIALLY BUFFALO AND COW LEATHERS. OPTIONALLY SHAVING PROCESS CAN BE WET OR DRY. BECAUSE OF THE MACHINE SPECIFICATIONS, THE MACHINE SHAVES SENSITIVELY. ALL ADJUSTMENTS CAN BE FOLLOWED ON THE TOUCH-SCREEN OPERATOR PANEL. ALL APPROACH AND REMOVING MOTIONS ARE MADE BY BUTTONS AND CAN BE SEEN ON THE TOUCH-SCREEN OPERATOR PANEL.

  1. THE BODY PART OF THE MACHINE IS MADE OF GG30 CAST IRON.

 

  1. THE BLADED ROLLER IS ON THE ORBICULAR BEARING HOUSES WHICH HAS A 240*416 MM. DIMENSIONS. OUR BLADED ROLLER IS EQUIPPED WITH HEUSCH BLADES.

 

  1. THE LEATHER CARRIER ROLLER (CHROMIUM ROLLER) IS DRIVEN BY ELECTROMOTOR AND TIMING BELT. IT ACTS FORWARD AND REVERSE BY ELECTRICAL SYSTEM WHICH CAN BE SEEN ON THE OPERATOR PANEL ELECTRONICALLY. THE SPEED OF THE CHROMIUM ROLLER IS ADJUSTABLE FOR INCREASING THE SURFACE SHAVING QUALITY. OVER THE CYLINDER AGAINST ABRASION AND OXIDATION IS CHROME PLATED. FOR THICKNESS STANDARDIZATION, THE CHROMIUM ROLLER MANUFACTURES A SHAPE OF CAMBER. THE CHROMIUM CARRIER ROLLER’S PLAINNESS IS ADJUSTED FROM LEFT AND RIGHT SIDE THUMBWHEEL SWITCH LEVERS.

 

  1. THE RUBBER ROLLER’S COATING PROCESS IS MADE BY VERY SENSITIVE MACHINES. AGAIN MAINTAINING THE THICKNESS STANDARDIZATION, RUBBER ROLLER IS DRIVEN BY ELECTROMOTOR FOR HOLDING THE MATERIAL ON THE ROLLER.
  2. RUBBER PROPELLER;

AFTER SHAVING OF THE MATERIAL, THE MACHINE IS SUPPORTED WITH A 4-CHANNEL RUBBER PROPELLER IN ORDER TO PREVENT THE ENDS OR UP TO THE EDGES OF CHIPS FOR WRAPPING

THE BLADED ROLLER. WITH THE HELP OF A FAN, BY COMPRESSING AIR FROM A THIN PROFILE WHICH HAS HOLES ON, THE MATERIAL IS PREVENTED TO GO INSIDE OF ANY PART OF THE MACHINE. THAT PROPELLER APPARATUS AND COMPRESSING TECHNOLOGY HELPS FOR PREVENTING WASTE OF LEATHER AND SAFETY OF THE OPERATOR.

 

 

  1. GRINDING SYSTEM;

THE GRINDING SUPPORT BUILDS ON THE MOVING HOLDER. AT THE SAME TIME, THE BLADED ROLLER ASSEMBLES TO THE GRINDING SUPPORT. THE GRINDING SUPPORT AND THE BLADED ROLLER IS DRIVEN BY PLC, ENCODER AND ELECTRIC MOTOR ACCORDING TO THE OPERATOR’S MOVEMENT COMMAND. THE GRINDING WHEEL AND IT'S MOTOR ARE ASSEMBLED ON THE MOVING HOLDER. THE GRINDING CAR, MOVES BY REDUCTION MOTOR, GEAR AND CHAIN. THE GRINDING SYSTEM HAS AN AUTOMATIC LUBRICATION. THERE IS A SPECIAL CONNECTOR BETWEEN GRINDING SUPPORT AND GRINDING CAR. THE NAME OF THAT CONNECTOR IS TURSAIT. THE GRINDING SUPPORT IS MADE BY RASPING METHOD. THE GRINDING CAR IS CONTROLLED BY AN INVERTER MOTOR AND CLUTCH SYSTEM.

  1. THE BLADED ROLLER’S MOVING MOTOR IS  75 KW 1500 RPM / MIN. THE BLADES WHICH DRIVES BETWEEN THE ENGINE PULLEY AND BLADED ROLLER PULLEY ARE SUPPORTED WITH A HYDRAULIC TENSIONER PULLEY.
  2. THE ROLLERS, PUMPS, FILTERS AND ALL EQUIPMENTS ARE DUPLOMATIC (ITALIAN) WHICH IS ONE OF THE MOST WELL-KNOWN BRAND IN THE WORLD. VALVES ARE VICKERS FROM USA. ALL ELECTRICAL AND ELECTRONIC EQUIPMENTS ARE SCHNEIDER (FRENCH).
  3. SAFETY SYSTEM;
  • FRONT SIDE---TOUCH SCREEN PANEL
  • FRONT SIDE---PNEUMATIC HOSES
  • ON THE ELECTRICAL PANEL---LATCHING SWITCH
  • LIMIT SWITCHS
  • PEDAL ADJUSTMENT MECHANISM
  1. NEW HYDRAULIC SYSTEM PROVIDES TO AVOID OIL OVERHEATING AND THANKS TO THE WIDE TANK AND LOW PRESSURE WORKING CONDITIONS.
  2. THE EMPLOYED COMPONENTS ARE ONE OF THE BEST AND MOST RELIABLE BRANDS THAT ARE PRESENT ON THE WORLD.

WORKING WIDTH = 3000 MM

MAIN MOTOR = 75 KW

HYDRAULIC PUMP MOTOR = 4 KW

GRINDING SLED DRIVE MOTOR = 0.75 KW

GRINDING STONE MOTOR = 2,2 KW

GRINDING STONE APPROACHING MOTOR = 0.18 KW

BLADED CYLINDER APPROACHING MOTOR = 1,1 KW

ROTOR MOTOR = 0.55 KW

CHROMIUM PLATED ROLLER DRIVE MOTOR = 4 KW

PRESSURE ROLLER DRIVE MOTOR = 3 KW

TOTAL INSTALLED POWER = 90.78 KW

NET WEIGHT = 12.250 KG

DIMENSIONS (L x W x H) = 5300 X 1850 X 1800 M